On-Vehicle Inspection
- INSPECT REAR SPEAKER
HINT:
Remove interior parts so that the rear speaker can be seen.
- Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the rear speaker.
- Visually check the speaker.
OK: The cone paper of the speaker is not torn.
If the result is not as specified, replace the rear speaker.
- Speaker resistance check
- Disconnect the rear speaker connector.
- Measure the resistance between the terminals of the speaker.
Standard resistance:
Separate Type Amplifier: 1.6 to 2.0 Ω
Built-in Type Amplifier: 3.4 to 4.6 Ω
If the result is not as specified, replace the rear speaker.
- Check the speaker installation.