Torque Specifications
SUSPENSION CONTROL TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Active height control pump motor | |||
| AHC fluid line | 15 | 155 | 11 |
| AHC pump motor bracket x Body | 18 | 185 | 13 |
| AHC pump motor bracket x AHC pump motor assembly | 5.5 | 55 | 48 in.*lbf |
| Cushion bolt | 6.9 | 70 | 61 in.*lbf |
| Bracket x AHC pump motor assembly | 5.5 | 55 | 48 in.*lbf |
| Reservoir x Housing | 6.9 | 70 | 61 in.*lbf |
| Reservoir bracket x Housing | 12 | 120 | 8 |
| Fluid pressure sensor | 44 | 450 | 33 |
| Fluid temperature sensor | 22 | 220 | 16 |
| pump cover x housing | 12 | 120 | 3 |
| Pump sub-assembly x Housing | 5.6 | 58 | 50 in.*lbf |
| Pump motor x Housing | 5.2 | 53 | 46 in.*lbf |
| Control valve assembly | |||
| AHC fluid line | 15 | 155 | 11 |
| Bracket x Control valve assembly | 5.5 | 55 | 48 in.*lbf |
| Cushion bolt | 7.8 | 80 | 69 in.*lbf |
| Cover x Control valve assembly | 4.4 | 45 | 38 in.*lbf |
| Height control accumulator | |||
| Inlet fluid line | 15 | 155 | 11 |
| Outlet fluid line | 30 (24) | 310 (245) | 22 (18) |
| Height control accumulator x Body | 29 | 300 | 22 |
| Bleeder plug | 6.9 | 70 | 61 in.*lbf |
| Pump attenuator | - | ||
| Inlet fluid line | 15 | 155 | 11 |
| Outlet fluid line | 30 (24) | 310 (245) | 22 (18) |
| Pump attenuator x Body | 18 | 185 | 13 |
| Damping force control actuator | |||
| Inlet fluid line | 15 | 155 | 11 |
| Outlet fluid line | 44 | 450 | 33 |
| Cover x Body | 28 | 290 | 21 |
| Bleeder plug | 8.3 | 84 | 73 in.*lbf |
| Damping force control actuator x Body | 29 | 300 | 22 |
| Gas chamber x Damping force control actuator | 90 (25) | 918 (250) | 66 (18) |
| Height control sensor | |||
| Height control sensor link x Front upper suspension arm | 5.6 | 57 | 49 in.*lbf |
| Height control sensor link x Rear upper control arm | 5.6 | 57 | 49 in.*lbf |
| Height control sensor x Body | 28 | 285 | 21 |
(): For use with SST