LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> General Information >> OEM General Information >> Service Specifications >> 2UZ-FE Emission Control System >> Torque Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications

TORQUE SPECIFICATIONS TABLE

Part Tightened N*m kgf*cm ft.*lbf
V-bank cover x V-bank bracket 7.5 76 66 in.*lbf
Intake air connector pipe x Body 5.0 51 44 in.*lbf
Hose clamp x Intake manifold 5.0 51 44 in.*lbf
V-bank cover bracket x Intake manifold 7.5 76 66 in.*lbf
Intake manifold x Cylinder head 18 185 13
No. 2 air switching valve x Cylinder head 10 102 7
No. 2 air switching valve x No. 3 air tube 10 102 7
No. 3 air tube x Exhaust manifold 10 102 7
Air switching valve x Air pump bracket 16 163 12
Air switching valve x Pressure sensor 5.0 55 48 in.*lbf
Charcoal canister assembly x Body 14 150 11
VSV for air injection system x Intake manifold 7.5 76 66 in.*lbf
Purge VSV x intake manifold 18 184 13
Ventilation valve x Cylinder head 27 275 20
Air fuel ratio sensor (for bank 1) x Exhaust manifold LH : for use with SST 40 408 30
Air fuel ratio sensor (for bank 1) x Exhaust manifold LH : for use without SST 44 449 32
Air fuel ratio sensor (for bank 2) x Exhaust manifold RH : for use with SST 40 408 30
Air fuel ratio sensor (for bank 2) x Exhaust manifold RH : for use without SST 44 449 32
Heated oxygen sensor (for bank 1) x Exhaust manifold LH : for use with SST 40 408 30
Heated oxygen sensor (for bank 1) x Exhaust manifold LH : for use without SST 44 449 32
Heated oxygen sensor (for bank 2) x Exhaust manifold RH : for use with SST 40 408 30
Heated oxygen sensor (for bank 2) x Exhaust manifold RH : for use without SST 44 449 32