October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Coolant Temperature Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- DRAIN ENGINE COOLANT (See REPLACEMENT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY (see
REMOVAL )
- REMOVE INTAKE AIR CONNECTOR PIPE (see
REMOVAL )
- REMOVE THROTTLE BODY (see
REMOVAL )
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the sensor connector.
- Remove the sensor.
- Remove the gasket from the sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002