October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Camshaft Position Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- DRAIN ENGINE COOLANT (See REPLACEMENT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY (see
REMOVAL )
- REMOVE INTAKE AIR CONNECTOR PIPE (see
REMOVAL )
- DISCONNECT NO. 1 RADIATOR HOSE (See REMOVAL
)
- REMOVE NO. 3 TIMING BELT COVER SUB-ASSEMBLY BANK 1 (See REMOVAL
)
- REMOVE CAMSHAFT POSITION SENSOR
- Remove the bolt, stud bolt and camshaft position sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002