SFI System: Precaution
- INITIALIZATION NOTE:
- Perform RESET MEMORY (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM (See INITIALIZATION for 2WD, INITIALIZATION for 4WD).
- Perform REGISTRATION (VIN registration) when replacing the ECM (See REGISTRATION ).
- FOR USING INTELLIGENT TESTER CAUTION: Observe the following items for safety reasons:
- Before using the tester, read the instruction manual.
- Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
- When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.
- FOR USING BATTERY DURING INSPECTION
- While using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.