Active Test

ACTIVE TEST

HINT: Performing the ACTIVE TEST using the intelligent tester allows components such as the relay, VSV and actuator to operate without part removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten labor time.

It is possible to display the DATA LIST during the ACTIVE TEST.

a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch on (IG).
c. According to the display on the tester, perform the ACTIVE TEST.

HINT: The ignition switch must be turned on (IG) to proceed to the ACTIVE TEST using the intelligent tester.