Laser Sensor: Installation
WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL LASER SENSOR
- Install the laser sensor so that the claw contacts the flat surface around the hole on the front bumper mounting reinforcement.
NOTE: Do not insert the claw into the hole on the front bumper mounting reinforcement.
- Engage the clamp.
- Install the laser sensor so that the claw contacts the flat surface around the hole on the front bumper mounting reinforcement.
- INSTALL FRONT BUMPER REINFORCEMENT (See DISASSEMBLY )