September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Camshaft Position Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- DRAIN ENGINE COOLANT (See COOLANT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL
)
- REMOVE INTAKE AIR CONNECTOR PIPE (See REMOVAL
)
- DISCONNECT NO. 1 RADIATOR HOSE (See REMOVAL
)
- REMOVE NO. 3 TIMING BELT COVER SUBASSEMBLY BANK 1 (See REMOVAL
)
- REMOVE CAMSHAFT POSITION SENSOR
- Remove the bolt, stud bolt and camshaft position sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002