Service Data
SERVICE DATA SPECIFICATION (SUSPENSION CONTROL SYSTEM)
| Air suspension | Amount of change in vehicle height | - | |
| - | HIGH position: | 40 mm (1.57 in.) | |
| - | LOW position: | -20 mm (-0.79 in.) | |
| Difference between the right side and the left side | - | ||
| - | measure vehicle height value: | 10 mm (0.39 in.) or less | |
| - | using the hand-held tester value: | 5 mm (0.20 in.) or less | |
| - | not Using the hand-held tester value: | 0.2 V or less | |
| Difference between the tester value and vehicle height | - | ||
| (D-C measurement): | 5 mm (0.20 in.) or less | ||
| Height control sensor link | standard length: | 6.5 - 15.0 mm (0.26 - 0.59 in.) | |
| Reas | Joint gap space | dimension of gap: | 1 mm (0.04 in.) |