October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
IGNITION RELAY (No.2) INSPECTION
- REMOVE IGNITION RELAY (Marking: IG2)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSPECT IGNITION RELAY
- Check the resistance of the IG relay.
Standard:
SPECIFIED CONDITION CHART
| Tester Condition |
Specified Condition |
| 3 - 5 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
If the result is not as specified, replace the relay.
- REINSTALL IGNITION RELAY
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002