LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Exhaust System) >> Catalytic Converter >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Catalytic Converter: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position torca band clamp on the catalytic converter.
  2. Install the muffler into the catalytic converter until guide pin seats in slot on muffler.
  3. Tighten torca clamp to 54 N.m (480 in. lbs.).
  4. Install exhaust system (Refer to INSTALLATION - EXHAUST SYSTEM  ).
scientia non olet · About LEMON Manuals