October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Commutator End Frame Assembly Test
- Using vernier calipers, measure the brush length. See Fig 1. Verify length is within specification. See STARTER SPECIFICATIONS . If the length is less than minimum, replace the starter commutator end frame assembly.
- Using an ohmmeter, verify that there is no continuity between the positive and negative brush holders. See Fig 2. If there is continuity between the positive and negative brush holders, repair or replace the starter commutator end frame assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002