LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Exhaust Gas RECIRCULATION System) >> Valve >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Section 983 (Exhaust Gas RECIRCULATION System): Valve: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 2 mounting bolts into the EGR valve and gasket (Figure ).
  2. Loose install the EGR valve to cylinder head.
  3. Loose install the EGR tube to EGR valve (Figure ).
  4. Tighten bolts for EGR valve then the EGR tube.
  5. Connect and lock the electrical connector for the EGR valve (Figure ).
  6. Install the battery.
  7. Connect the positive then the negative battery cable.
scientia non olet · About LEMON Manuals