Torque Specifications
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| A/C Compressor Bolts | 33 | 25 | - |
| A/C Compressor Mounting Bracket Bolts | 115 | 85 | - |
| A/C Compressor Shaft Nut | 17.5 | 13 | 155 |
| Blower Motor Screws | 2 | - | 17 |
| Center Bezel Outlet Screws | 2 | - | 17 |
| Condenser Mounting Bracket Bolts | 5 | - | 45 |
| Discharge Line to Condenser Nut | 23 | 17 | - |
| Discharge Line to Compressor Nut | 23 | 17 | - |
| Expansion Valve Mounting Screws | 11 | - | 100 |
| Filter-drier Mounting Bracket Nuts | 10 | - | 89 |
| Floor Console Base Nuts and Bolts | 5 | - | 45 |
| Floor Console Support Screws | 2 | - | 17 |
| Front Fascia Grille Insert Screws | 2 | - | 17 |
| Front Fascia to Closure Panel Crossmember Bolts | 6 | - | 53 |
| Hands-Free Module Screws | 2 | - | 17 |
| Heater-A/C Control Screws | 2 | - | 17 |
| Heater-A/C Unit Housing Bracket Screw | 3 | - | 26 |
| Heater-A/C Unit Housing Screws | 2 | - | 17 |
| Heater-A/C Unit Housing Stud Nuts | 7 | - | 62 |
| Heater Core Tube Sealing Plate Screws | 3 | - | 27 |
| Heater Inlet Tube Bolts | 10 | - | 89 |
| Hood Latch Bolts | 14 | 10 | 123 |
| Instrument Panel Outlet Screws | 2 | - | 17 |
| Liquid Line to Condenser Nut | 23 | 17 | - |
| Liquid Line to Expansion Valve Nut | 23 | 17 | - |
| Liquid Lines to Filter-drier Bolts | 11 | - | 100 |
| Mode, Blend and Recirculation Door Actuator Screws | 2 | - | 17 |
| Power Module Screws | 2 | - | 17 |
| Rear Blower Motor Housing to Console Screws | 2 | - | 17 |
| Rear Blower Motor Housing Screws | 2 | - | 17 |
| Rear Blower Motor Switch Screws | 2 | - | 17 |
| Suction Line to Compressor Nut | 23 | 17 | - |
| Suction and Liquid Line to Expansion Valve Nut | 23 | 17 | - |
| Transmission Oil Cooler Bolts | 5 | - | 45 |