LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 973 (Power Liftgate System) >> Prop Rod Assembly >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Prop Rod Assembly: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure the retaining clips are seated into the ball socket fully.
  2. Install the support cylinder over the ball studs with the thin end connected to the liftgate and the retaining clips snapping into place.
scientia non olet · About LEMON Manuals