Component Function Check

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before performing the diagnosis, check that the following is normal.

Battery saver output/power supply
Front step lamp bulbs
Rear step lamp bulbs
Foot lamp bulbs (if equipped)

CHECK STEP LAMP OPERATION
WITH CONSULT
1. Turn ignition switch ON.
2. Select "STEP LAMP TEST" of BCM (INT LAMP) active test item.
3. While operating the test item, check that the front step lamps, rear step lamps and foot lamps (if equipped) turn ON/OFF.
  ON: Step lamp ON
  
  OFF: Step lamp OFF
  
  Is the inspection result normal?
  
  YES: Step lamp circuit is normal.
  
  NO: Refer to "DIAGNOSIS PROCEDURE ".