Inspection Procedure
WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Check the power window master switch circuit using DTC check
- OK: Proceed to next circuit inspection shown on problem symptom table (see PROBLEM SYMPTOMS TABLE ).
- NG: Go to next step.
- Check the power window master switch (See
INSPECTION
).
- NG: Replace the power window master switch.
- OK: Go to next Step.
- Check wire harness and connector between power window master switch and body ECU.
- NG: Repair or replace wire harness or connector.
- OK: Go to next step.
Proceed to next circuit inspection shown on problem symptom table (See PROBLEM SYMPTOMS TABLE ).