LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Systems - Diagnostics >> Circuit Inspection >> Door Lock Control Switch Circuit >> Inspection Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

  1. Check door lock control switch (See  INSPECTION  ). 

    NG: Replace door lock control switch. 

    OK: Go To Next Step. 

  2. Check wire harness and connector between door lock control switch and passenger side J/B ECU (See page  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 

    NG: Repair or replace harness or connector. 

    OK: Go To Next Step. 

  3. Check harness and connector between door lock control switch and power window master switch. 

    NG: Repair or replace harness or connector. 

    OK Proceed to next circuit inspection shown in (See page  PROBLEM SYMPTOMS TABLE  ). 

scientia non olet · About LEMON Manuals