Specifications & Procedures

Loosen tension pulley lock nut. Loosen drive belt tension by adjusting bolt and remove belt. To install belt, see Fig 1 for proper drive belt routing pattern. Tighten drive belt tension by adjusting bolt. See BELT ADJUSTMENT - TENSION IN LBS. (KG) USING BELT TENSION GAUGE table. Tighten tension pulley lock nut to 30 ft. lbs. (40 Nm).

BELT ADJUSTMENT - TENSION IN Lbs. (kg) USING BELT TENSION GAUGE

Application

New Belt

⁽¹⁾ Used Belt

A/C-Water Pump

99-121 (44-55)

57-77 (26-35)

⁽¹⁾	Used belt is a belt in operation at least 5 minutes.

DRIVE BELT ROUTING

For serpentine drive belt routing, see Fig 1.

Fig 1: Drive Belt Routing (W/ AC Compressor)