Service Specifications

AIR CONDITIONING SPECIFICATIONS

Application

Specification

Compressor Type

⁽¹⁾

Compressor Belt Tension

⁽²⁾

Compressor Oil Capacity ⁽³⁾

⁽¹⁾

Condenser Oil Capacity ⁽³⁾

1.4 ozs.

Evaporator Oil Capacity ⁽³⁾

1.4 ozs.

Refrigerant (R-134a) Capacity

With Only Front A/C System

21.2-24.7 ozs

With Front & Rear A/C Systems

35.3-38.8 ozs.

System Operating Pressures ⁽⁴⁾

High Side

199-213 psi (14-15 kg/cm² )

Low Side

21-36 psi (1.5-2.5 kg/cm² )

⁽¹⁾	Information is not available from manufacturer.

⁽²⁾	Automatic belt tensioner is used. Adjustment is not required. Belt must be replaced if arrow mark on automatic belt tensioner is not within area "A". See Fig 1.

⁽³⁾	Use ND-OIL 8 refrigerant oil or equivalent.

⁽⁴⁾	With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 2000 RPM, blower switch in HI position and temperature control dial in COOL position.

Fig 1: Locating Arrow Mark On Automatic Belt Tensioner