Pinout Values and Diagnostic Parameters

INSPECTION

1. REMOVE ECM
a. Remove the glove compartment door.
b. Remove the connector cover.
c. Remove the 2 screws and ECM.
d. Disconnect the ECM connectors.

Terminals Of ECM/Pinouts Part 1:

Terminals Of ECM/Pinouts Part 2:

2. INSPECT ECM

3. REINSTALL ECM
a. Connect the 3 ECM connectors.
b. Install the ECM with the 2 screws.
c. Install the connector cover.
d. Install the glove compartment door.