October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

CHECK DOOR LOCK (See INSPECTION .
NG: REPLACE DOOR LOCK

OK: Go to next step

CHECK WIRE HARNESS (TVIP ECU <=> DOOR LOCK)

Disconnect the TVIP ECU and door lock connectors.

Check the continuity between the terminals of the TVIP ECU and door lock connectors.

Standard:

WIRE HARNESS (TVIP ECU <=> DOOR LOCK) CONTINUITY CHECK

Symbols (Terminal No.) (TVIP ECU <=> Door lock)	Specified condition
LSWD (T3-37) <=> D8-8	Continuity
LSWP (T3-38) <=> D9-7	Continuity

Fig 1: Checking Wire Harness Connecting TVIP ECU And Door Lock

G02833084

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: REPAIR OR REPLACE WIRE HARNESS AND CONNECTOR

OK: Go to next step

CHECK WIRE HARNESS (DOOR LOCK <=> BODY GROUND)
1. Disconnect the door lock connector.
2. Check the continuity between the terminal of the door lock connector and the body ground.
  Standard:
  
  Fig 2: Door Lock Connector Continuity Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 3: Identifying Door Lock Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPAIR OR REPLACE WIRE HARNESS AND CONNECTOR

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS (See PROBLEM SYMPTOMS )