LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2001 >> Tacoma S-Runner >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Trouble Shooting >> Cruise Control Function Test >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cruise Control Function Test: Notes

NOTE: Before performing CRUISE CONTROL FUNCTION TEST, see DIAGNOSTIC TESTS . Cruise control function test should only be performed if no self-diagnostic trouble codes are present.

Cruise control function test is used to help determine if cruise control circuits are functioning properly when no trouble codes are present. To activate function test, turn ignition on. Push cruise control switch to SET/COAST or RES/ACC position and hold. Depress cruise ON-OFF button to ON position. Ensure CRUISE indicator light comes on and flashes after 3 seconds. Release cruise control switch from SET/COAST position. Activate each switch circuit in order given. Normal function code will be displayed by CRUISE indicator light, as each of the following circuits is activated.

scientia non olet · About LEMON Manuals