LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2001 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications >> Fuel Systems >> Throttle Position Sensor >> Throttle Position Sensor Resistance Specifications (MR2)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor Resistance Specifications (MR2)

THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)

Application Throttle Position Terminals Ohms
1.8L 4-Cyl.
2000 Models Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
2001Models (1)
With Standard Type Manual Transaxle Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
Models With Sequential Manual Transaxle .... VC & E2 (2) 1200-3200
(1) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward and uses a special fluid in the fluid reservoir. The sequential manual transaxle may be identified by the shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used.
(2) Resistance at 68°F (20°C).
scientia non olet · About LEMON Manuals