Ignition Coil Resistance: Non-Turbo

Remove ignition coil. See REMOVE/INSTALL/OVERHAUL article.
Using ohmmeter, check ignition coil primary resistance between positive (+) and negative (-) electrical terminals on ignition coil. See Fig 1. Replace ignition coil if ignition coil primary resistance is not within specification. See IGNITION COIL RESISTANCE table.
Using ohmmeter, check ignition coil secondary resistance between electrical terminals on ignition coil. See Fig 2. Replace ignition coil if ignition coil secondary resistance is not within specification. See IGNITION COIL RESISTANCE table. Reinstall ignition coil.

Fig 1: Checking Ignition Coil Primary Resistance (Non-Turbo)

Fig 2: Checking Ignition Coil Secondary Resistance (Non-Turbo)