October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Intake Air Temperature Sensor
- Ensure ignition is off. Disconnect electrical connector from intake air temperature sensor. Intake air temperature sensor is located on top cover of air filter housing.
NOTE:
Intake air temperature sensor may be also identified using appropriate illustration in THEORY/OPERATION
article.
- Remove intake air temperature sensor. Place threaded end of intake air temperature sensor and thermometer in container of water. Attach ohmmeter between electrical terminals on intake air temperature sensor.
- Heat water and note that resistance is within specification in relation to temperature. See Figure. Replace intake air temperature sensor if resistance is not within specification.