October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Circuit Opening Relay
- Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table.
NOTE:
Circuit opening relay may also be identified using appropriate illustration in THEORY/OPERATION
article and wire color. See appropriate wiring diagram in WIRING DIAGRAMS
article. CIRCUIT OPENING RELAY LOCATIONS
| Application |
Relay Location |
| Corolla |
Bottom Center Of Instrument Panel, In Front Of Center Console, Near Driver's Side Of ECM |
- To test circuit opening relay continuity, using ohmmeter, check continuity between specified terminals. See Fig 1 and Fig 2.
- To test circuit opening relay operation, apply battery voltage and ground to relay and use ohmmeter to check continuity between specified terminals. See Fig 1 and Fig 2. Replace circuit opening relay if defective.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002