LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1996 >> Corolla Base, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Starter Relay Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Starter Relay Test

  1. Locate and remove starter relay. See STARTER RELAY LOCATION  table. Using ohmmeter, verify continuity between relay terminals No. 1 and 2. See Fig 1. Continuity should not exist between terminals No. 3 and 5. If continuity is not as indicated, replace relay.
  2. Check relay operation by applying battery voltage through terminals No. 1 and 2. See Fig 1. Continuity should now exist between terminals No. 3 and 5. If relay does not test as indicated, replace relay.
Fig 1: Testing Starter Relay
G93A82271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
STARTER RELAY LOCATION

Application Location
Corolla (1)(2) Driver Side Kick Panel Fuse/Relay Block No. 1
(1) On models with manual transmission/transaxle only.
(2) Relay is grounded by theft deterrent system ECU (if equipped).
scientia non olet · About LEMON Manuals