LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> T100 DX, 4WD, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Wheel Alignment Procedures >> Caster Adjustment >> Front Suspension
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Suspension

  1. Measure riding height, camber, and steering axis inclination. See WHEEL ALIGNMENT SPECIFICATIONS . If adjustment is necessary, see appropriate adjustment procedure.
  2. Measure caster of both front wheels. If caster is not within specification, add or remove shims on upper control arms on 2WD models. On 2WD, adjust shim thickness between front and rear locations to within .16" (4 mm). If measurement cannot be met, adjust strut rod length by adjusting strut rod nuts. See Fig 1. On 4WD models, loosen and rotate adjuster cams. See Figure.
Fig 1: Identifying Caster Adjuster Nut (2WD)
G92B01689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals