LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1995 >> Avalon XLS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Ignition Coil >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Remove "V" bank cover for access ignition coils. Refer to Figure. Disconnect electrical connector at ignition coil. Remove bolt and ignition coil.
  2. To install, reverse removal procedure. Tighten bolt to specification. See TORQUE SPECIFICATIONS .
Fig 1: Releasing Typical Lock Claw On Spark Plug Wire
G96A10710Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Identifying Typical Holder, Grommet & Checking Holder, & Grommet Installation
G96B10711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals