Blower Speed Control Switch

Unplug connector from blower speed control switch. Test for continuity between specified terminals. See TESTING BLOWER SPEED CONTROL SWITCH table. See Fig 1. If continuity is not as specified, replace blower switch.

TESTING BLOWER SPEED CONTROL SWITCH

Switch Position

⁽¹⁾ Continuity Between Terminals

OFF

⁽¹⁾

2 - 5

(D) ⁽²⁾

1, 2 & 5

(D) ⁽³⁾

2, 5 & 7

2, 3 & 5

⁽¹⁾	With switch in any position, continuity should exist between terminals No. 6 and 8. With switch in OFF position, continuity should not exist between any other terminals.

⁽²⁾	Circle (D) closer to LO position.

⁽³⁾	Circle (D) closer to HI position.

Fig 1: Blower Speed Control Switch Connector Terminal ID