October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Window Main Relay
- Remove power window main relay, located in junction block No. 1 at left side kick panel.
- Using an ohmmeter, check continuity between power window main relay terminals No. 1 and 3. Continuity should exist. See Fig 1. Apply battery voltage to terminal No. 1 and ground terminal No. 3. Continuity should exist at terminals No. 2 and 4. If relay does not test as described, replace power window main relay.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002