LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1990 >> Tercel DX, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Start Motor Brushes & Springs Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Start Motor Brushes & Springs Test

  1. Connect one ohmmeter lead to positive brush holder and other lead to negative brush holder. If test needle moves, brush holder assembly is shorted and must be replaced.
  2. Check brush length. If less than specification, replace brushes. Check spring tension. Spring tension should be 37-48 ozs. (1050-1350 g). Brushes must move freely in holders.
MINIMUM BRUSH LENGTH

Application Length - In. (mm)
Tercel .39 (10)
scientia non olet · About LEMON Manuals