LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1988 >> Tercel Base, 2D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Starter - Direct Drive >> Testing >> Bench Tests >> Commutator
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Bench Tests: Commutator

  1. Clean surface and polish with No. 400 sandpaper if required. If surface is scored, out of round or pitted, turn commutator in a lathe.
  2. Maximum commutator runout and minimum diameter of commutator must not exceed specification after turning.
    COMMUTATOR SPECIFICATIONS

    Application Maximum Runout Minimum Thickness
    Tercel .016 (.40) 1.06 (27.0)
  3. Commutator mica undercut depth on all models should be .016-.031" (.40-.80 mm). Minimum mica undercut depth is .008" (.20 mm). If not within specification, undercut with a hacksaw blade to standard depth.
scientia non olet · About LEMON Manuals