Neutral Start Switch
Using an ohmmeter, check for continuity at specified terminals in appropriate gear position. See NEUTRAL START SWITCH CONTINUITY table. See Fig 1.
NEUTRAL START SWITCH CONTINUITY
| Gear Shift Position | Terminals |
|---|---|
| "P" Range | "B" & "N", & "C" & "PL" |
| "R" Range | "C" & "RL" |
| "N" Range | "B" & "N", & "C" & "NL" |
| "D" Range | "C" & "DL" |
| "3" Range | "C" & "3L" |
| "2" Range | "C" & "2L" |
| "L" Range | "C" & "LL" |