Sensor - Impact Accelerometer - B-Pillar - LH - Remove And Replace: Install

Installation procedure is the reverse of removal, except for the following:

To reinstall the upper B-Pillar trim:

• Adjust the seatbelt slider on the body-side B-Pillar so that it aligns with the seatbelt opening on the upper B-Pillar trim.
• Insert the upper edge of the upper B-Pillar trim under the headliner.
• Make sure that the upper B-Pillar trim is aligned with the lower B-Pillar trim.
• Make sure that the front and rear door seals overlap the upper B-Pillar trim.