September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Complete The Alignment
- Print the vehicle summary and verify that the alignment parameters are within specifications. See WHEEL ALIGNMENT
.
NOTE:
Repeat the adjustment for any parameter that is not within specification.
- Install the mid aero shield panel. See PANEL - AERO SHIELD - MID (REMOVE AND REPLACE)
.
- Lower the alignment rack to a working height and lock.
- Remove the alignment heads from the wheels.
- Remove the brake pedal depressor.
- Install the alignment slip/turn plate pins.
- Lower the alignment rack to the ground.
- Unlatch the driver's door, shift into Park, and remove the steering wheel bubble level.
- Unbuckle the seat belts and remove the ballast bags from the vehicle.
- Remove the seat covers from the seats.
- Enable Service Mode through the touchscreen. See ENABLE SERVICE MODE VIA VEHICLE TOUCHSCREEN
- Unlock the vehicle gateway for diagnostic communication.See GATEWAY (UNLOCK)
- On the vehicle touchscreen, touch Service Mode
(spanner icon).
- Touch Chassis
(damper icon) and then touch Alignment & Tires
.
- Touch Clear Offset
, and then touch Run
.
- Touch Controls
(vehicle icon), Service Mode
and then touch Exit Service Mode
.
- Remove the wheel chocks.
- Install the cowl screen panel, if removed. See PANEL - COWL SCREEN - REMOVE AND REPLACE
- Remove the vehicle from the alignment rack.
- Perform a test drive and verify vehicle operation.