Camera - Rear View - Remove And Replace: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
Installation procedure is the reverse of removal, except for the following:
- Verify the rear-view camera operation.
- Connect a laptop with Toolbox 3 to the vehicle.
- Go to Dashboards > Service Tools > DAS Clear Calibration > Clear Calibration Backup .
- Go to Dashboards > Service Tools > View DAS images > Image Capture .
- Verify that the newly installed camera is able to capture the image by looking at the view for the rear-view camera.