Wiper Blades - Adjust: Check

If the wiper blades streak or chatter during cycling, perform the following:

1. Use the touchscreen to set the wipers to Service Mode.
2. Clean the wiper blades thoroughly with isopropyl alcohol wipes or equivalent.
3. Clean the windshield thoroughly with isopropyl alcohol wipes or equivalent. Check that the windshield has no dirt, residue, commercial coatings, etc.
4. Spray the windshield with the washer jet.
5. Cycle the wiper blades on high. If streaking or chatter persists, complete the following procedure or procedures that address your issue.