September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Module - Intrusion Sensor - Remove And Replace: Removal
- Use a trim tool to release the clips (x2) that attach the rear of the overhead console, and then pull the rear of the overhead console down.
NOTE:
Make sure not to damage the harness connections inside of the headliner.
 Courtesy of TESLA, INC.
|
- Disconnect the headliner electrical harness from the microphone connectors (x2) and the intrusion sensor connector, and then remove the overhead console with the intrusion sensor module from the vehicle.
 Courtesy of TESLA, INC.
|