Update Vehicle Firmware To Correct Boombox Functionality (SB-22-00-003 R2)
Publication date: 2022-04-18Reference number: SB-22-00-003 R2
Supersedes refnos: SB-22-00-003, SB-22-00-003 R1
UPDATE VEHICLE FIRMWARE TO CORRECT BOOMBOX FUNCTIONALITY
SERVICE CAMPAIGN BULLETIN
| TESLA: | 2017 - 2022 All Models |
| CLASSIFICATION: | Recall Bulletin |
| GROUP: | 00 - Inspection and Service |
SERVICE INFORMATION
Recall Bulletin: Recall Bulletins are mandatory service procedures that must be carried out by Tesla-certified Service Centers.
Recall work performed by uncertified technicians could lead to unsafe conditions or voided warranty provisions.
This Service Document supersedes SB-22-00-003 R1, dated 7-Mar-22. Each content change is marked by a vertical line in the left margin. Discard the previous version and replace it with this one.
CONDITION
Vehicles equipped with the Pedestrian Warning System (PWS), including vehicles that are configured with Summon or Smart Summon, and operating firmware version releases before 2022.12 (except 2022.3.102.1, 2022.3.103.0.1, 2022.3.103.5) can use the Boombox feature when in motion or while Summon or Smart Summon is in use.
CORRECTION
Update the firmware version to 2022.12 or later to enable Boombox while in Park only.
| Correction Description | Correction | Time |
|---|---|---|
| Inspect Vehicle Firmware Version, No Update Necessary | S012200003 | 0.05 |
| Inspect And Update Vehicle Firmware To Correct Boombox Operation | S022200003 | 0.05 |
PROCEDURE
- On the vehicle touchscreen, touch Controls
(vehicle icon) > Software
, and then scroll down to display the vehicle firmware version.
- If the vehicle is operating with firmware version 2022.3.102.1, 2022.3.103.0.1, 2022.3.103.5, no further action is necessary. Use correction code S012200003.
- If the vehicle is operating with firmware version 2022.12 or later, no further action is necessary. Use correction code S012200003.
- If the vehicle is operating with a firmware version before 2022.12 (except 2022.3.102.1, 2022.3.103.0.1, 2022.3.103.5), then update to the latest available firmware release. Use correction code S022200003.