October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Nozzle - Windshield Washer - Adjust: Adjust
- Open LH front door
- Lower LH front window
- Activate windshield washers and verify washer nozzle spray pattern
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Confirm the jets sprayed in the green zone.
NOTE:
If the jet spray is on-target, discontinue this procedure. If the spray is off-target, continue to the next step.
 Courtesy of TESLA, INC.
|
- Using a straight pick, adjust the washer nozzles.
NOTE:
Align the washer jet angle to between the middle of the windshield and 15 mm above the black border of dots (frit) along the bottom of the windshield (11 degrees +/- 1 degree).
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Activate windshield washers and verify washer nozzle spray pattern
Courtesy of TESLA, INC.
|
Courtesy of TESLA, INC.
|
- Raise LH front window and close door
 Courtesy of TESLA, INC.
|