LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> SX4 SportBack, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostic Information and Procedures >> DTC C1075: Steering Angle Sensor Calibration Incomplete >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

C1075: SYMPTOM TROUBLESHOOTING REFERENCE CHART

Step Action YES NO
1  Was "Electronic Stability Program Check" performed?  Go to Step 2. Go to ELECTRONIC STABILITY PROGRAM CHECK .
2  DTC check for ESP® 
  1. Connect SUZUKI scan tool to DLC with ignition switch turned OFF.
  2. Turn ignition switch ON and check DTC for ESP®.

Is there any DTC(s) other than C1075? 		 Go to applicable DTC troubleshooting. Go to Step 3.
3  Check sensor calibration 
  1. Calibrate steering angle sensor referring to SENSOR CALIBRATION OF ESP® .
  2. Clear all DTC(s) and check DTC for ESP®.

Is DTC C1075 still detected? 		 Substitute a known-good steering angle sensor and recheck. If DTC C1075 is still detected, substitute a known-good ESP® hydraulic unit/control module assembly and recheck. Calibration was incompleted.
scientia non olet · About LEMON Manuals