Tightening Torque Specifications
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Starting motor cable nut | 11 | 1.1 | 8.5 | Refer to Starting Motor Removal and Installation . |
| Starting motor mounting bolt | 45 | 4.6 | 33.5 | Refer to Starting Motor Removal and Installation . |
| Brush holder screw | 3.5 | 0.36 | 3.0 | Refer to Starting Motor Removal and Installation . |
| End frame bolt | 6.0 | 0.61 | 4.5 | Refer to Starting Motor Disassembly and Reassembly . |
| Magnetic switch screw | 6.0 | 0.61 | 4.5 | Refer to Starting Motor Disassembly and Reassembly . |
| Lead wire nut | 10 | 1.0 | 7.5 | Refer to Starting Motor Disassembly and Reassembly . |
NOTE:
The specified tightening torque is described in the following.
STARTING MOTOR COMPONENTS
STARTING MOTOR COMPONENTS
Reference:
For the tightening torque of fastener not specified in this service information, refer to FASTENERS INFORMATION .