Table TCC ON command
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
PRIMARY PULLEY SPEED SENSOR RATIONALITY MONITOR ACCELERATOR PEDAL POSITION CHART
| Accelerator pedal position (%) | 0.0 | 12.5 | 20.0 | 25.0 | 35.0 | 62.5 | 75.0 | 87.5 | 100.0 |
| Vehicle speed (km/h) | 17 | 17 | 17 | 17 | 25 | 30 | 30 | 30 | 30 |
| (mile/h) | 11 | 11 | 11 | 11 | 16 | 19 | 19 | 19 | 19 |
PO717 SYMPTOM DIAGNOSIS DESCRIPTION CHART
| Parameter | Minimum | Maximum |
|---|---|---|
| P0717: | ||
| Monitor 1: | ||
| Secondary pulley speed | 500 RPM | - |
| Battery voltage | 10.5 V | - |
| Secondary pulley speed sensor | No DTC (P0721) | |
| Sensor ground | No DTC (P1970) | |
| CAN communication | No DTC (U0100, U0073) | |
| Monitor 2: | ||
| Last primary pulley speed | 1000 RPM | - |
| Battery voltage | 10.5 V | - |
| Secondary pulley speed sensor | No DTC (P0721) | |
| Sensor ground | No DTC (P1970) | |
| CAN communication | No DTC (U0100, U0073) | |