LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> SX4 LE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Immobilizer Control System) >> Diagnostic Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF position,
  2. Connect SUZUKI scan tool to data link connector (DLC) (1) located under instrument panel at driver's seat side.

    Special Tool 

    (A): SUZUKI scan tool (SUZUKI-SDT) 

    Fig 1: Identifying SUZUKI Scan Tool Connection With Data Link Connector (DLC)
    G06868969Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn the ignition switch to ON position.
  4. Clear DTC(s) according to the instructions displayed on SUZUKI scan tool.
  5. After completing the clearance, turn the ignition switch to OFF position, and then disconnect SUZUKI scan tool from DLC.
scientia non olet · About LEMON Manuals