Electric Throttle Control System Calibration

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Select calibration procedure from table below.

ELECTRIC THROTTLE CONTROL SYSTEM CALIBRATION REFERENCE CHART

Calibration procedure	Service item
[A]	ECM power supply shutoff (i.e. disconnection of battery cable, replacement of battery, "DOME" fuse blown) ECM replacement Clearance of DTC(s) related to electric throttle control system
[B]	Throttle body assembly replacement APP sensor assembly replacement

Perform selected calibration procedure as follows.
Calibration procedure [A]:
1. Keep ignition switch in ON position for 5 seconds or more without running engine.
Calibration procedure [B]:
1. Disconnect negative cable from battery.
2. Disconnect ECM connectors for 30 seconds or more to clear calibration data of closed throttle position from ECM.
3. Connect ECM connectors and connect negative cable to battery.
4. Keep ignition switch in ON position for 5 seconds or more without running engine.