Propeller Shaft Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: PROPELLER SHAFT INSPECTION

Reverse removal procedure to install propeller shaft, noting the following point.

When installing propeller shaft, align the match marks (2). Otherwise, vibration may occur during driving.
Use the following specification to torque each bolt and nut.
Tightening torque

Propeller shaft bolt: 23 N.m (2.3 kg-m, 17.0 lbf-ft)

Center support nut: 50 N.m (5.1 kg-m, 37.0 lbf-ft)