LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> SX4 LE, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Diagnostic Information and Procedures >> DTC Clearance >> Permanent DTC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Permanent DTC

  1. Connect CAN communication OBD generic scan tool or SUZUKI scan tool to DLC. See DTC Check .
  2. Turn ignition switch to ON position.
  3. Clear the pending and confirmed DTCs.
  4. Select the permanent DTC mode on scan tool. (Refer to scan tool operators manual for details.)
  5. Execute the corresponding DTC confirmation procedure in the DTC diagnostic flow and confirm that the pending and current DTCs cannot be detected. At this time, if the DTC confirmation procedure does not satisfy any of the following conditions, execute the DTC confirmation procedure so as to satisfy such condition.
    • The engine operated for more than 12 minutes.
    • The vehicle driven for more than 6 minutes at more than 45 km/h (28 mile/h).
    • The engine idled for more than 1 minute.
  6. Display the permanent DTC on scan tool and check that the permanent DTC is cleared. If the permanent DTC has not been cleared, repeat step  5) again.
scientia non olet · About LEMON Manuals